1- Install the logging server on a machine that will not be turned off (although it can be logged off), and is in a convenient place to monitor logs. (PSquirrelPrinterLogServerSetup.exe). This will install the logging server service and the monitoring program (Printer Squirrel).
Important note: Make sure that ports 2326 - 2330 and 2376 and 2380 are open if you have a firewall on the logging server prior to installation. These ports must be unblocked for proper sending and receiving of logs. On the windows firewall these are blocked by default.
2- Install the logging clients on the print servers that the printers are connected to, either physically or via a direct network connection. (PrinterLogClientSetup.exe) This will install the logging client service and its' configuration utility.
**Note** If you are installing both the logger server and logger client on the same computer, you must restart the computer after installing the logger client.
Next Page
